A Dynamometer Design for Measurement the Cutting Forces on Turning

Basit Öğe Kaydı
dc.contributor.authorYaldız, Süleyman
dc.contributor.authorÜnsaçar, Faruk
dc.date.accessioned2020-03-26T17:02:56Z
dc.date.available2020-03-26T17:02:56Z
dc.date.issued2006
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThe cutting forces generated in metal cutting have a direct influence on generation heat. tool wear or failure, quality of machined surface and accuracy of the work piece. In this study, a turning dynamometer that can measure static and dynamic cutting forces by using strain gauge and piezo-electric accelerometer respectively has been designed and constructed. The orientation of octagonal rings and strain gauge locations has been determined to maximize sensitivity and to minimize cross-sensitivity. The force signals were captured and processed using proper data acquisition system. The dynamometer has been subjected to a series of tests to determine its static and dynamic characteristics. The results obtained showed that the dynamometer could be used reliably to measure static and dynamic cutting forces.en_US
dc.identifier.citationYaldız, S., Ünsaçar, F., (2006). A Dynamometer Design for Measurement the Cutting Forces on Turning. Measurement, 39(1), 80-89. Doi:10.1016/j.measurement.2005.07.008
dc.identifier.doi10.1016/j.measurement.2005.07.008en_US
dc.identifier.endpage89en_US
dc.identifier.issn0263-2241en_US
dc.identifier.issue1en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage80en_US
dc.identifier.urihttps://dx.doi.org/10.1016/j.measurement.2005.07.008
dc.identifier.urihttps://hdl.handle.net/20.500.12395/20284
dc.identifier.volume39en_US
dc.identifier.wosWOS:000234740800009en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorYaldız, Süleyman
dc.institutionauthorÜnsaçar, Faruk
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMeasurementen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectDynamometeren_US
dc.subjectStrain gaugeen_US
dc.subjectData acquisitionen_US
dc.subjectTurningen_US
dc.titleA Dynamometer Design for Measurement the Cutting Forces on Turningen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği/Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu