Synthesis and Metal Ions Sorption Properties of Styrene-Based Polymers
Küçük Resim Yok
Tarih
2009
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
WILEY
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Atactic polystyrene (PS) was chemically modified with maleic (MAH), succinic (SAH), and phtalic (PhAH) anhydrides. Styrene was copolymerized with acrylic (AA) and methacrylic acids (MA). Amount of carboxyl groups (%) bound to polymers was determined in the range of 6.9-25.9. Different modified polystyrenes (MPS) and styrene copolymers were used in the experiments to study Cu(II) and Zn(II) ions adsorption probability and their comparison. Sorption capacity of the polymers for the metal ions were investigated in aqueous media containing different amounts of these ions (540 mg/L) and at different pH values (2.0-6.0). Adsorption behavior of heavy metal ions could be modeled using both the Langmuir and Freundlich isotherms. It was found that the adsorption capacity is highest at pH value of 6, whereas it decreases as the pH value decreases at temperature 25 degrees C +/- 1 degrees C for 240 min. The results obtained from the adsorption capacity experiments for Cu(II) and Zn(II) ions were 3.47-5.45 and 5.42-6.85 mg/g, respectively. The affinity order of polymers for both metal ions was observed as follows: SMAC > SAAC > MPS with MAH > MPS with SAH > MPS with PhAH. The maximum adsorption capacities of SMAC were 6.85mg/g for Zn(II) and 5.45 mg/g for Cu(II). (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 112: 1192-1198, 2009
Açıklama
Anahtar Kelimeler
styrene, copolymerization, modification, polystyrene, adsorption
Kaynak
JOURNAL OF APPLIED POLYMER SCIENCE
WoS Q Değeri
Q2
Scopus Q Değeri
Q2
Cilt
112
Sayı
3
