Effect of airborne particle abrasion and sintering order on the surface roughness and shear bond strength between Y-TZP ceramic and resin cement

Basit Öğe Kaydı
dc.contributor.authorOkutan, Yener.
dc.contributor.authorYucel, Munir Tolga.
dc.contributor.authorGezer, Tugce.
dc.contributor.authorDonmez, Mustafa Borga.
dc.date.accessioned2020-03-26T20:13:34Z
dc.date.available2020-03-26T20:13:34Z
dc.date.issued2019
dc.departmentSelçuk Üniversitesi, Diş Hekimliği Fakültesi, Klinik Bilimler Bölümüen_US
dc.description.abstractThis study examined the surface roughness (R-a) and shear bond strength (SBS) of Yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic after airborne particle abrasion at different pressures and particle sizes, pre- and post-sintering. Ninety specimens, prepared from Y-TZP ceramic blocks (Vita In-Ceram YZ, Vita Zahnfabrik), were divided into nine subgroups: control, and 50 and 110 gm Al2O3 airborne particle abrasion at 3 and 4 bar pressure, before and after sintering, respectively. According to the sintering order, before and after surface treatments, R-a values were measured using a profilometer. SBS to Y-TZP was assessed after thermocycling, using self-adhesive resin cement (Rely X U200, 3M ESPE). Scanning electron microscopy (SEM) and X-ray diffractometry (XRD) were performed on one specimen per group. All surface-treated samples were rougher than the controls. ABS50-4 (50 mu m Al2O3 airborne particle abrasion at 4 bar pressure before sintering), ABS110-3, and ABS110-4 showed the highest R-a values, among all cohorts. The controls displayed lower SBS values than the treated groups (p<0.05), which had statistically similar results to each other. Airborne particle abrasion of pre-sintered Y-TZP, followed by sintering, increased the tetragonal structure contents.en_US
dc.identifier.citationOkutan, Y., Yucel, M. T., Gezer, T., Donmez, M. B. (2019). Effect of Airborne Particle Abrasion and Sintering Order on the Surface Roughness and Shear Bond Strength Between Y-TZP Ceramic and Resin Cement. Dental Materials Journal, 38(2), 241-249.
dc.identifier.doi10.4012/dmj.2018-051en_US
dc.identifier.endpage249en_US
dc.identifier.issn0287-4547en_US
dc.identifier.issue2en_US
dc.identifier.pmid30541993en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage241en_US
dc.identifier.urihttps://dx.doi.org/10.4012/dmj.2018-051
dc.identifier.urihttps://hdl.handle.net/20.500.12395/37720
dc.identifier.volume38en_US
dc.identifier.wosWOS:000469158900011en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.institutionauthorYucel, Munir Tolga.
dc.institutionauthorGezer, Tugce.
dc.institutionauthorDonmez, Mustafa Borga.
dc.language.isoenen_US
dc.publisherJAPANESE SOC DENTAL MATERIALS DEVICESen_US
dc.relation.ispartofDENTAL MATERIALS JOURNALen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectShear bond strengthen_US
dc.subjectSurface treatmenten_US
dc.subjectY-TZP ceramicen_US
dc.titleEffect of airborne particle abrasion and sintering order on the surface roughness and shear bond strength between Y-TZP ceramic and resin cementen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
Yener OKUTAN.pdf
Boyut:
3.9 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Full Text Access
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Protetik Diş Tedavisi/Makale Koleksiyonu
PubMed İndeksli Yayın Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu