Pretreatment of Olive Oil Mill Wastewater by Two Different Applications of Fenton Oxidation Processes

dc.contributor.authorÖzdemir, Celalettin
dc.contributor.authorTezcan, Hayrunnisa
dc.contributor.authorŞahinkaya, Serkan
dc.contributor.authorKalıpcı, Erkan
dc.date.accessioned2020-03-26T18:04:50Z
dc.date.available2020-03-26T18:04:50Z
dc.date.issued2010
dc.departmentSelçuk Üniversitesien_US
dc.description.abstractThe removal of chemical oxygen demand (COD) and phenol from olive oil mill wastewaters (OOMW) was investigated experimentally by using conventional Fenton (CFP) and Fenton type processes (FTP) with zero valent iron (ZVI). Different operational parameters such as initial pH, Fe(2+), Fe(0), and H(2)O(2) concentrations were examined. Kinetic studies in terms of COD and phenol removals for both CFP and FTP were performed. The original pH value (4.6) of OOMW for CFP was found as the optimum pH. The determined optimum conditions are [Fe(2+)] 1500 mg L(-1), [H(2)O(2)] 1750 mg L(-1), and pH = 4.6 for CFP; [Fe(0)] = 2000 mg L(-1), [H(2)O(2)] 2000 mg L(-1), and pH 3 for FTP. 82.4% COD and 62% phenol removals were performed under the optimum conditions by CFP, while 82% COD and 63.4% phenol were removed by FTP. According to the results of kinetic studies, it was observed that COD and phenol were removed by FTP more rapidly, compared to CFP. Consequently, it was determined that both CFP and FTP were effective processes for the pretreatment of OOMW.en_US
dc.description.sponsorshipSelcuk University Research Found (BAP)Selcuk University [09201003]en_US
dc.description.sponsorshipThe authors gratefully acknowledge the financial support of this project by Selcuk University Research Found (BAP) (Project number: 09201003).en_US
dc.identifier.citationÖzdemir, C., Tezcan, H., Şahinkaya, S., Kalıpcı, E., (2010). Pretreatment of Olive Oil Mill Wastewater by Two Different Applications of Fenton Oxidation Processes. Clean-Soil Air Water, 38(12), 1152-1158. Doi: 10.1002/clen.201000222
dc.identifier.doi10.1002/clen.201000222en_US
dc.identifier.endpage1158en_US
dc.identifier.issn1863-0650en_US
dc.identifier.issue12en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage1152en_US
dc.identifier.urihttps://dx.doi.org/10.1002/clen.201000222
dc.identifier.urihttps://hdl.handle.net/20.500.12395/25179
dc.identifier.volume38en_US
dc.identifier.wosWOS:000285421700008en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorÖzdemir, Celalettin
dc.institutionauthorTezcan, Hayrunnisa
dc.institutionauthorŞahinkaya, Serkan
dc.institutionauthorKalıpcı, Erkan
dc.language.isoenen_US
dc.publisherWiley-V C H Verlag Gmbhen_US
dc.relation.ispartofClean-Soil Air Wateren_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.selcuk20240510_oaigen_US
dc.subjectCODen_US
dc.subjectFenton processen_US
dc.subjectOlive oilen_US
dc.subjectPhenolen_US
dc.subjectWastewateren_US
dc.subjectZero valent ironen_US
dc.titlePretreatment of Olive Oil Mill Wastewater by Two Different Applications of Fenton Oxidation Processesen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
5179.pdf
Boyut:
353.26 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Makale Dosyası