Advanced Oxidation of Biologically Pretreated Baker's Yeast Industry Effluents for High Recalcitrant COD and Color Removal
Yükleniyor...
Tarih
2003
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The aim of this study was to investigate the effectiveness of chemical oxidation by applying ozonation, ozonation with hydrogen peroxide and Fenton's processes for decolorization and residual COD removal of biologically pretreated baker's yeast industry (BYI) effluents. Baker's yeast industry effluents characterizing with high COD, TKN, dark color, and non-biodegradable organic pollutants. The batch tests were performed to determine the optimum operating conditions including pH, O3, H2O2, and FeSO4 dosages, molar ratio of Fe2+/H2O 2 and reaction time. It was noticed that H2O2 significantly reduced the reaction times for the same ozone dosages; however, COD and color removals were not remarkable. In the Fenton's oxidation studies, the removal efficiencies of COD and color for 30 min reaction time for three different types of BYI effluents were found about 86 and 92%, respectively. Experimental results of the presented study have clearly indicated that the Fenton's oxidation technology is capable to fate almost all parts of the organics which consist of both soluble initial and microbial inert fractions of COD for baker's yeast effluents. Effluents from the Fenton's oxidation process can satisfy effluent standards for COD and color in general.
Açıklama
Anahtar Kelimeler
Advanced Oxidation, Baker's Yeast İndustry Effluents, Fenton's Oxidation, Ozonation, Refractory Organics
Kaynak
Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering
WoS Q Değeri
Q3
Scopus Q Değeri
Q3
Cilt
38
Sayı
10
Künye
Altınbaş, M., Aydın, A. F., Sevimli, M. F., Öztürk, İ., (2003). Advanced Oxidation of Biologically Pretreated Baker's Yeast Industry Effluents for High Recalcitrant COD and Color Removal. Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, 38(10), 2229-2240. Doi: 10.1081/ESE-120023370
